TermSeek Canon Repair

imn Setting Custom Functions

[Custom Functions (C.Fn) Copyright information CJear settings firmware Ver. 1.0.0

I Select [Custom Functions (C.Fn)].

• Under the tab, select [Custom Functions (C.Fn)], then press <©>.

Custom Function No.

C,Fn I: Exposure Exposure level increments

Select the Custom Function No.

• Press the key to select the

Custom Function No., then press

C,Fn I: Exposure Exposure level increments

i Change the setting as desired.

• Press the key to select the setting (number), then press <©>.

• Repeat steps 2 and 3 if you want to set other Custom Functions.

• At the bottom of the screen, the current Custom Function settings are indicated below the respective function numbers.

4 Exit the setting.

The screen for step 1 will reappear.

Clearing All Custom Functions

On the [7 Clear settings] menu, select [Clear all Custom Func. (C.Fn)] to clear all the Custom Function settings (p.144).

Custom Functions

C.Fn I: Exposure				A LV shooting
1	Exposure level increments			O
2	ISO expansion	p.192		O
3	Flash sync. speed in Av mode			O
* The C.Fn I -1 setting will also be applied to movie shooting.
C.Fn II: Image
4	Long exposure noise reduction	p.193		O
5	High ISO speed noise reduction			O
6	Highlight tone priority	p.194		O
C.Fn III: Autofocus/Drive		\
7	AF-assist beam firing	p.194		O
8	Mirror lockup	p.195
C.Fn IV: Operation/Others
9	Shutter/AE lock button	p.195		O
10	Assign SET button	p.196
11	LCD display when power ON			O
12	Add image verification data	p.197		O

The shaded Custom Functions do not work during Live View (LV) shooting. (Settings are disabled.)

0 0